Hawking Technologies HNC5W Installation Guide

HNC5W HawkVision Smart Cam Pro Manual

- 9 - 1.3 Features and Benefits  H.264/MPEG4/MJPEG Multi-codec Supported The camera provides you with excellent images using H.264/MPEG4/ MJPEG mu

- 10 -  Multiple Profiles Supported The camera supports multiple profiles simultaneously, so that you can separately set up different image setting

- 11 -  I/O Connectors Provided The camera provides the I/O connectors on the rear panel (IN/OUT), which provide the physical interface to send and

- 12 - 1.4 System Requirement  Networking  LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet; Auto-MDIX.  WLAN: (for wireless model) IEEE 8

- 13 - CHAPTER 2 HARDWARE INSTALLATION 2.1 Installing the Wall Mount Kit The camera comes with a Wall Mount Kit, which allows you to place your came

- 14 - 2.2 Connecting the Camera to LAN/WLAN  Connecting to LAN Use the provided Ethernet cable to connect the camera to your local area network (

- 15 -  Connecting to WLAN If you use a wireless network in your application environment, you need to attach the included external antenna to the

- 16 - 2.3 Applications of the Camera The camera can be applied in multiple applications, including:  Monitor local and remote places and objects

- 17 - CHAPTER 3 ACCESSING THE CAMERA 3.1 Using IPFinder The camera comes with a setup utility, IPFinder, which is included in the Installation CD-R

- 18 - 3.2 Accessing to the Camera Whenever you want to access the camera: 1. Since the default configuration of the camera is DHCP mode enabled, i

- 1 - PREFACE Thank you for purchasing the HNC5W HawkVision Smart Cam Pro, a standalone system that can be connected directly to an Ethernet or Wirel

- 19 - After you login into the Web Configuration of the camera, the Main screen will appear as below: The Main screen of the Web Configuration pro

- 20 -  Left/Right/Up/Down/Home buttons allow you to move the camera lens position. Clicking the Home button will move the camera lens to the assig

- 21 -  Listen allows you to receive the on-site sound and voice from the camera.  Trigger Out allows you to trigger on/off the GPIO output manua

- 22 - 3.3 Configuring the IP Address of the PC If you fail to access to the camera using the above methods, please check the IP address of your com

- 23 - CHAPTER 4 CONFIGURING THE CAMERA 4.1 Using the Web Configuration You can access and manage the camera through the Web browser and the provide

- 24 - 4.2 Quick Setup 4.2.1 Using Smart Wizard The camera’s Smart Wizard lets you configure your camera easily and quickly. The wizard will guide

- 25 - Step 4. Wireless Networking Step 5. Confirm Settings Enter the required information to be able to send email with image. Enter the required

- 26 - Click Apply to finish the wizard and reboot the camera. Click Prev to go back to the previous step(s) and change the settings; or click Canc

- 27 - 4.2.2 Using My Android The camera’s My Android wizard lets you set up your Android mobile and Google services (Google Talk and Picasa) easily

- 28 - Step 5. Confirm Settings NOTE Once you have set your Gmail account in step 2, the Email setting in Event Server Setting will be comple

- 2 - This manual provides you with the instructions and illustrations on how to use your camera, which includes: Chapter 1 Introduction to Your Cam

- 29 - 4.3 Basic Setup The Basic menu contains three sub-menus that provide the system settings for the camera, such as the Camera Name, Location, D

- 30 -  Date and Time: Enter the correct date and time for the system. - TimeZone: Select the proper time zone for the region from the pull-down

- 31 -  Administrator: To prevent unauthorized access to the camera’s Web Configuration, you are strongly recommend to change the default administ

- 32 - After entering the User Name and Password, click Add/Modify to add the new user to the camera. To modify the user’s information, select the on

- 33 - 4.4 Network Settings The Network menu contains the networking related settings for the camera, such as the IP Setting, DDNS Setting, IP Filte

- 34 - - DHCP: Select this option when your network uses the DHCP server. When the camera starts up, it will be assigned an IP address from the DHCP

- 35 - NOTE You have to sign up for DDNS service with the service provider before configuring this feature.  UPnP: The camera supports UPnP (Unive

- 36 - - RTSP Port: The default RTSP Port (Real Time Streaming Protocol) is 554. 4.4.3 Network >> IP Filter The IP Filter setting allows t

- 37 - For example, when you enter 192.168.0.50/192.168.0.80 in Start/End IP Address of Accept > IPv4, the user whose IP address located within 19

- 38 - Click Site Survey to display the available wireless networks, so that you can easily connect to one of the listed wireless networks. List of s

- 3 - Contents PREFACE ... 1 CHAPTER 1 ...

- 39 - If you select Open or Shared-key as the Authentication mode, you need to complete the following settings:  Encryption: Select the WEP option

- 40 - 4.4.5 Network >> Wireless >> WPS Setting WPS (Wi-Fi Protected Setup) sets a new standard of Wi-Fi security, providing a simplif

- 41 - 4.5 Pan & Tilt Settings The Pan/Tilt menu allows you to configure the pan/tilt functions of the camera.  Pan/Tilt Calibration: Click C

- 42 - 4.6 Setting up Video & Audio The Video & Audio menu contains four sub-menus that provide the video and audio settings for the camera.

- 43 - - Light Frequency: Select the proper frequency according to the camera’s location to reduce the flicker: 50Hz, 60Hz or Outdoor. TIP When the

- 44 - The higher setting (VGA) obtains better video quality while it uses more resource within your network. - Video Quality: Select the desired im

- 45 - 4.6.4 Video & Audio >> Overlay / Mask This sub-menu is used to set the image overlay and mask feature of the camera.  Image Overl

- 46 - 4.6.5 Video & Audio >> Overlay / Mask >> Text Overlay This page is used to set the text overlay feature of the camera, includ

- 47 - 4.7 Event Server Configuration The Event Server menu contains six sub-menus that allow you to upload images to FTP, send emails that include

- 48 - 4.7.1 Event Server Setting >> FTP  FTP - Host Address: Enter the IP address of the target FTP server. - Port Number: Enter the port

- 4 - A.2 TERMINAL APPLICATION ... 65 A.3 GLOSSARY OF TERMS ...

- 49 - - Authentication Mode: Select None or SMTP according to the mail server configuration. - Sender User Name: Enter the user name to login the

- 50 - - When Storage Full: Select Stop Recording or Recycle – Delete Oldest Folder when the storage space on the Network Storage server is full. -

- 51 - 4.7.5 Event Server Setting >> Picasa Setting The camera supports the Picasa upload service, so that you can send the camera’s image to

- 52 - 4.8 Motion Detect The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of

- 53 - 4.9 Event Configuration The Event Config menu contains five sub-menus that provide the commands to configure event profiles. 4.9.1 Event C

- 54 -  Schedule Profile: This sub-menu displays the scheduled profile(s). To customize the profile, click Add and then enter a descriptive name fo

- 55 - 4.9.3 Event Configuration >> Motion Detect Trigger  Motion Detect Trigger: Select the Enable option to enable the trigger function of

- 56 - 4.9.5 Event Configuration >> GPIO Trigger  Select the Enable Trigger in 1 option to enable the GPIO trigger function of the camera, s

- 57 - 4.10 Tools The Tools menu provides the commands that allow you to restart or reset the camera. You can also backup and restore your configura

- 58 - - Current Firmware Version: This item displays the current firmware version. - Select the firmware: Click Browse to locate the backup file

- 5 - CHAPTER 1 INTRODUCTION TO YOUR CAMERA 1.1 Checking the Package Contents Check the items contained in the package carefully. You should have th

- 59 - 4.11 USB The USB menu provides the information and controls of the connected USB device.  USB Dismount: To safely remove the connected USB

- 60 - - File Format: Set the file format of the recorded video as MP4 or AVI.

- 61 - 4.12 Information The Information menu displays the current configuration and events log of the camera.  Device Info: Display the Basic, Vi

- 62 - Appendix A.1 Specification  Image Sensor Sensor 1/4” Color Megapixel CMOS Sensor Resolution 1280 x 1024 Min. Illumination 2 Lux  System

- 63 -  Communication LAN 10/100Mbps Fast Ethernet with Auto-MDIX WLAN (for wireless model) IEEE 802.11b/g/n Protocol support TCP/IP,IPV6, UDP,

- 64 -  Pan/Tilt Pan 165 degree (left) to 165 degree (right) Tilt 90 degree (up) to 15 degree (down)  Software OS Support Windows XP/Vista, an

- 65 - A.2 Terminal Application Typically used in association with programming scripts for developing applications for motion detection, event trigge

- 66 - A.3 Glossary of Terms NUMBERS 10BASE-T 10BASE-T is Ethernet over UTP Category III, IV, or V unshielded twisted-pair media. 100BASE-TX The two

- 67 - C Communication Communication has four components: sender, receiver, message, and medium. In networks, devices and application tasks and proc

- 68 - E Enterprise network An enterprise network consists of collections of networks connected to each other over a geographically dispersed area.

- 6 - 1.2 Getting to Know Your Camera  Front / Right Panel a. Infrared LEDs (x7) allow your camera to capture clear image in a dark environmen

- 69 - H HEX Short for hexadecimal refers to the base-16 number system, which consists of 16 unique symbols: the numbers 0 to 9 and the letters A to

- 70 - connection methods, you get connected to the computer that “owns” that IP address. ISP ISP (Internet Service Provider) is a company tha

- 71 - internal network appear to the Internet as a single address. For routing messages properly within your network, each device requires a unique

- 72 - Protocol Communication on the network is governed by sets of rules called protocols. Protocols provide the guidelines devices use to communica

- 73 - S Server It is a simple computer that provides resources, such as files or other information. SIP SIP (Session Initiated Protocol) is a stan

- 74 - U UDP The User Datagram Protocol is a connectionless protocol that resides above IP in the TCP/IP suite User Name The USERNAME is the unique

- 7 - e. Internal Microphone allows the camera to receive sound and voice. f. Link LED indicates the camera’s network connectivity with the flashin

- 8 - i. USB Unmount Button is used to remove the connected USB device safely. NOTE After long pressing the Unmount button for four seconds, the P